(Page 41 of 46 in this chapter) Version

RunFile

Syntax

RunFile = filename

Description

Specifies the runtime software to be transferred to the board by agmon. For AG 2000, AG 4000, and AG 4000C boards, the RunFile is the core file which is used with module extension files (specified by the RunModule statement).

The following are examples of run files:
Run File

 Board Type

sysdn.run

 Digital boards (AG-24/30/48/60)

sysan.run

 Analog boards (AG-8)

systn.run

 Digital boards (AG-T1, AG-E1)

sysqn.run

 Boards using channel associated signaling AG Quad, CompactPCI AG Quad)

ag2000.cor

 AG 2000 boards

ag4000.cor

 AG 4000/C boards

The RunFile statement is mandatory for all boards except AG 2000, AG 4000, and AG 4000C boards.

Example

Windows NT:
RunFile = c:\nms\ag\load\sysdn.run
RunFile = sysdn.run

UnixWare and Solaris:
RunFile = /opt/nms/ag/load/sysdn.run
RunFile = sysdn.run

See Also

RunModule


(Page 41 of 46 in this chapter) Version

tech_support@nmss.com
Copyright © 1999, Natural MicroSystems, Inc. All rights reserved.