For...	See...
An overview of AG-8 and AG-8/80 boards and related software components, and a summary of the installation process	Chapter 1 - About AG-8 and AG-8/80 Boards
Instructions on configuring the hardware and installing it in your computer	Chapter 2 - Installing the Hardware
Instructions for editing your AG configuration file so it properly reflects your setup	Chapter 3 - The AG Configuration File
Verification procedures to check your installation	Chapter 4 -Verifying the Installation
An overview of MVIP switching concepts and switch models	Chapter 5 - Using MVIP Switching
Glossary of terms	Appendix A - Glossary
Detailed information about line interface signaling (for reference purposes only)	Appendix B - Line Interface Signaling
Specifications for the AG-8 and AG-8/80 boards	Appendix C - Hardware Specifications

This manual...	Provides...
CT Access Developer's Reference Manual	An overview of CT Access and a reference of functions, events, reason codes, and errors.
CT Access Migration Manual	Instructions on migrating to CT Access from ME/2/X, AG Access, MVIP-90, and SwitchPath.
CT Access Installation Manual	A description of the installation of the software from the distribution diskettes and the configuration file. It also provides a procedure for verifying your installation.
AG Runtime Configuration and Developer's Manual	Information about the AG configuration file, ag.cfg, agmon, AG board and driver error messages, and AG task processors.
Getting Started With MVIP Switching	An overview of MVIP-90 and MVIP-95 switching.

• ADI Service Developer's Manual

• ADI Service Function Reference Manual

• Switching Service Developer's Reference Manual

• Voice Message Service Developer's Reference Manual