(Page 12 of 19 in this chapter)

SCCPResetRqst

Description

Sends a RESET message to the far endpoint and starts the reset timer.

Prototype

short SCCPResetRqst (U8 board,
SccpConnId *connId,
SccpResetRqst *resetRqst )
board The TX Series board number to which this request is directed.
connId The connection ID identifying the SAP and connection instance to which this request belongs.
resetRqst Pointer to the caller's reset request message containing all parameters to be included in the message to the far endpoint.

Return Values

SCCP_SUCCESS
SCCP_UNINITThe board number specified was not used in a successful call to SCCPInitAPI.
SCCP_INVALIDThe specified board does not exist or has not been configured in the system.
SCCP_DRIVERAn error occurred accessing the CPI driver. See the CPI error section for information on determining the cause of the error.

Details

If no Reset Confirmation message is received by the SCCP layer before the expiration of the timer, the connection is cleared in both directions by the SCCP layer.

(Page 12 of 19 in this chapter)

tech_support@nmss.com

Copyright © 1999, Natural MicroSystems, Inc. All rights reserved.