(Page 25 of 30 in this chapter)

SccpSetAddrCfg

Description

Sends a SCCP global title translation parameter block to the specified TX Series board.

Prototype

SCCP_STATUS SccpSetAddrCfg (U8 board,
SccpAddrMapCfg *pCfg )
board The TX Series board number to which this request is directed.
pCfg The address of global title translation parameters buffer (format specified in the SccpInitAddrCfg primitive reference).

Return Values

SCCP_SUCCESS
SCCP_BADDIGITA SccpAddrName primitive contains invalid BCD digits.
SCCP_BOARDThe board number is out of range.
SCCP_BUFLENThe length specified for a SccpAddrName primitive is invalid.
SCCP_DRIVERAn error occurred accessing the driver.
SCCP_EXCEEDMAXCFGToo many global title definitions.
SCCP_NOGENCFGThe SccpSetGenCfg primitive has not been called.
SCCP_NULLPTRA null pointer was specified for pCfg.
SCCP_PARAMAn invalid parameter was detected. Check the txalarm log.
SCCP_POINTCODEThe translated point code is out of range.
SCCP_RANGEOne or more of the following fields is out of range: addr.niInd, addr.rtgInd, addr.gt.format.
SCCP_RESOURCESA TX Series board resource is exhausted. Check the txalarm log.
SCCP_SWTYPEAn invalid switch type was specified.
SCCP_TIMEOUTThe request timed out.
SCCP_UNINITThe application failed to call SccpMgmtInit prior to this call.

Details

SccpSetAddrCfg be called any time after the general configuration is downloaded to the TX Series board (see the SccpSetGenCfg primitive) but before any application attempts to send data for transaction processing.
Once a global title translation is set by SccpSetAddrCfg, it can only be modified by first deleting it with SccpDelAddrCfg, and then calling SccpSetAddrCfg with the new parameters.
The pCfg buffer must have been previously initialized with the SccpInitAddrCfg primitive.

(Page 25 of 30 in this chapter)

tech_support@nmss.com

Copyright © 1999, Natural MicroSystems, Inc. All rights reserved.