(Page 3 of 12 in this chapter)

TCAPGenCfg

Description

Sends the TCAP general configuration parameters to the TX Series board.

Prototype

S16 TCAPGenCfg (U8 board, TcapGenCfg *cfg )
board The TX Series board number to which this request is directed.
cfg The address of a general configuration parameters buffer. The buffer's format is specified in the TCAPInitGenCfg primitive reference.

Return Values

TCAPM_SUCCESS
TCAPM_BADPARAMA parameter is out of range, most likely because the general configuration parameters buffer was not initialized using TCAPInitGenCfg. Also, check the txalarm log for messages.
TCAPM_BOARDThe board number is out of range.
TCAPM_CFGDUPGeneral configuration has already been sent to the board.
TCAPM_DRIVERAn error occurred accessing the driver.
TCAPM_FAILEDThe task on the TX Series board reported a failure.
TCAPM_NULLPTRA null pointer was specified for cfg.
TCAPM_MAXSAPSThe value specified for maxSaps is out of range.
TCAPM_RANGEA value is out of range. Check the settings for maxSaps, maxDLgs, or maxInvs.
TCAPM_TIMEOUTThe request timed out.
TCAPM_UNINITThe application failed to call TCAPInitMgmtAPI prior to this call.

Details

TCAPGenCfg may be called only once per download of the TX Series board. It must be called before any TCAP SAPs are configured.
The cfg buffer must be initialized with the TCAPInitGenCfg primitive prior to this call.

(Page 3 of 12 in this chapter)

tech_support@nmss.com

Copyright © 1999, Natural MicroSystems, Inc. All rights reserved.