(Page 1 of 27 in this chapter)
Chapter 5
ISUP Management API Reference
5.1 Files
isupBlockCircuit 215
isupCircCfg 216
isupCircuitStats 217
isupCircuitStatus 218
isupDeleteCircuit 219
isupGenCfg 220
isupGetCircCfg 221
isupGetGenCfg 222
isupGetNSapCfg 223
isupGetRouteCfg 224
isupGetUSapCfg 225
isupInitCircCfg 226
isupInitGenCfg 228
isupInitMgmtAPI 230
isupInitNSapCfg 231
isupInitRouteCfg 232
isupInitUSapCfg 233
isupNSapCfg 237
isupNSapStats 238
isupResetCircuit 239
isupRouteCfg 240
isupTermMgmtAPI 241
isupTraceControl 242
isupUnblockCircuit 243
isupUSapCfg 244
isupValidateCircuit 245
This section provides a detailed description of the primitives that comprise the ISUP Management API. It also describes the parameters required for each primitive. Some calls generate a request followed immediately by a response from the TX Series board. These primitives block for up to 5 seconds waiting for this response, and will return an indication of success or failure.
5.1 Files
The following files are provided with the ISUP API distribution software:
File
Description
isuptype.h
Basic data types employed by the ISUP API.
isupmgmt.h
Messages and constants described in this section.
libismi.a
Static library to link with user applications on UnixWare and Solaris systems.
isupmgmt.dll
Dynamic link library to link with user applications on Windows NT.
isupcfg.c
Source file for ISUP layer configuration utility.
isupmgr.c
Source file for ISUP layer management utility.
(Page 1 of 27 in this chapter)
tech_support@nmss.com
Copyright © 1999, Natural MicroSystems, Inc. All rights reserved.
(Page 1 of 27 in this chapter) (Page 1 of 27 in this chapter)