(Page 1 of 1 in this chapter)
About This Manual
The
SS7 ISDN User Part Developer's Manual
describes the functions and signaling procedures supported by the TX Series SS7 ISUP application program interface (API).
This manual is organized as follows:
For...
See...
An overview of the SS7 software architecture
Chapter 1
- Introduction
A detailed description of the TX Series ISUP API
Chapter 2
- SS7 ISUP API Description
A detailed encoding reference for events (messages) passed between the user application and the SS7 ISUP service layer
Chapter 3
- Event, Information Element, and Token Reference
A detailed description of the primitives (requests and responses) that comprise the ISUP API and the events (indications and confirmations) received via the
ISUPRetrieveMessage
primitive
Chapter 4
-API Reference
A detailed description of the primitives that comprise the ISUP Management API
Chapter 5
- ISUP Management API Reference
A description of the event initialization routines and API primitive cominations used to send and receive various ISUP protocol messages.
Chapter 6
- Message/API Cross-Reference
A list of returns values and their possible causes
Chapter 7
- Status Indications
A brief description of the sample applications provided with the ISUP API distribution.
Chapter 8
- Sample Programs
Related Documents
For more information, refer to the following manuals:
This manual...
Provides...
TX Series Hardware Installation Manual
Information on how to install the TX Series Communications Proccessor board and adapter daughterboards..
Signaling System 7 (SS7) Installation and Configuration Manual
Information on the installation, configuration, and operation of the SS7 Message Transfer Part (MTP) and optional ISDN User Part (ISUP), Telephone User Part (TUP), Signaling Connection Control Part (SCCP), and Transaction Capabilities Application Part (TCAP) software for the TX Series Communication Processors.
(Page 1 of 1 in this chapter)
tech_support@nmss.com
Copyright © 1999, Natural MicroSystems, Inc. All rights reserved.