(Page 13 of 35 in this chapter) Version
ISUPSuspendReq
Description
- Sends a SUSPEND message to the far exchange and starts the suspend timer T2.
Prototype
- DWORD ISUPSuspendReq ( U8 board,
SuId suId,
SiInstId suInstId,
SiInstId spInstId,
CirId circuit,
SiSuspEvnt *suspEvnt )
- ctahd CT Access handle returned by ctaCreateContext.
- suId ISUP service access point.
- suInstId Service user instance ID.
- spInstId Service provider instance ID.
- suspEvnt Pointer to the caller's suspend event structure containing all parameters (IEs) to be included in the message to the far exchange.
Return Values
Details
- If no RESUME or RELEASE message is received by the ISUP layer before the expiration of the T2 timer, the call is cleared in both directions by the ISUP layer.
- The value specified in the SuInstId field will be passed on all subsequent events associated with this connection.
- The value for spInstId must be the spInstID value that was received from the ISUP layer in the connect indication event.
4.2 API Event Initialization Routines
- This section describes functions for the initialization of event structures in order to generate specific ISUP protocol messages. Each subsection describes the event initialization for a specific protocol message, and contains tables specifying the initialized event fields for each supported switch type. Table entries in boldface are mandatory ISUP parameters.
(Page 13 of 35 in this chapter) Version
tech_support@nmss.com
Copyright © 2000, Natural MicroSystems, Inc. All rights
reserved.