(Page 35 of 36 in this chapter) Version
ISUPInitSAM
Description
- Initializes an SiCnStEvnt structure for use in transmitting a Subsequent Address Message (SAM).
Prototype
- S16 TXISUPAPIFUNC ISUPInitSAM (S16 switchType,
SiCnStEvnt *event,
U8 *sAddr,
U8 sAddrLen )
- switchType Switch type indicator. Must be ST_ITUWHITE, ST_ITUBLUE, or ST_ITUQ767.
- sAddr Pointer to BCD subsequent address
- sAddrLen Number of BCD digits in subsequent address
- event Pointer to the SiCnStEvnt structure to be initialized
Details
- The fields of the SiCnStEvnt structure are initialized as described in the tables below, based on the switchType parameter. Fields not described in the table are not applicable to an SAM. This function is called in preparation for a call to ISUPConnectStatusReq.
(Page 35 of 36 in this chapter) Version
Want to send us feedback on our documentation? Email: Tech_Pubs@nmss.com
Copyright © 2002, NMS Communications Corporation. All rights
reserved.