(Page 16 of 22 in this chapter) Version

TxT1E1ConfigCarrier

Description

Configures the basic operating parameters (framing type, line coding, and line build out) for a T1/E1 carrier.

Prototype

short TxT1E1ConfigCarrier (short handle,
unsigned char carrier,
TxT1E1Config pConfig)
handle TX board handle.
carrier Network interface. Must be either NET_T1A or NET_T1B.
pConfig Pointer to configuration block for this carrier.

Return Values

T1E1_SUCCESS
T1E1_INVALID_HANDLEThe specified handle is invalid.
T1E1_INVALID_CARRIERAn invalid network interface was specified.
T1E1_INVALID_FRAMINGFraming value is invalid.
T1E1_INVALID_CODINGEncoding scheme is invalid.
T1E1_INVALID_BLDOUT
Line buildout out of range.
T1E1_NO_RESOURCES
T1/E1 adapter not present on CP.
T1E1_DEVICE_ERROR
Invalid adapter found.

Details

None.

(Page 16 of 22 in this chapter) Version

tech_support@nmss.com

Copyright © 2000, Natural MicroSystems, Inc. All rights reserved.