- short TxT1E1CtrlCarrier (short handle,
unsigned char carrier,
unsigned char loopback,
unsigned char alarmState)
- handle TX board handle.
- carrier Network interface. Must be either NET_T1A or NET_T1B.
- loopback Loopback mode. Must be one of the following:
LOOPBACK_NONE Normal operating mode
(no loopback)
LOOPBACK_LOCAL Local data transmitted is
looped back to receive side
LOOPBACK_REMOTE Data received from line is
transmitted back onto line
- alarmState Forces the TX board to generate/stop generating an alarm on this carrier. Must be one of the following:
NO_ALARM Stop generating all alarms
YELLOW_ALARM Generate Yellow (or
distant/far end) alarm
BLUE_ALARM Generate Blue (also called
AIS) alarm
TS16AIS_ALARM Generate Timeslot 16 alarm
indication signal (E1 only)
DISTANTMF_ALARM Generate Distant Multiframe
alarm (E1 only)
(Page 18 of 22 in this chapter) Version