(Page 1 of 14 in this chapter) Version
Appendix A
MTP 2 Message Reference
- Introduction
- Bind Request 61
- Connect Request 62
- Connect Confirmation 63
- Data Request 64
- Data Confirmation 65
- Data Indication 67
- Disconnect Request 68
- Disconnect Indication 69
- Flow Control Request 70
- Flow Control Indication 71
- Status Request 72
- Status Confirmation 74
- Status Indication 76
Introduction
- This section specifies the layout of all messages between the MTP layer 2 process and the application (layer 3). The overall message layouts are slightly different depending on whether the message is being read/written directly from/to the TX driver or whether its being read from the IPC queue. These overall message layouts are shown in Section 2.1.4 and Section 2.1.5. The following sections define the structure of each message beginning with the MTP 2 message type and including all parameters of the message.
(Page 1 of 14 in this chapter) Version
tech_support@nmss.com
Copyright © 2000, Natural MicroSystems, Inc. All rights
reserved.