(Page 6 of 9 in this chapter) Version

Mtp2MgmtCtrl

Description

Sends a control request to the MTP 2 task.

Prototype

MTP2_STATUS Mtp2MgmtCtrl (U8 board, S16 entity, U8 action)
board The TX board number on which the desired MTP 2 task resides. This value must be from 1 to MAXBOARD (currently 8).
entity Reserved for future use.
action The action to take on the entity specified.
action is one of the following:

MTP2_CTRL_FLOWCTL_ON
Sets ALL links to the congested state (see Congestion Control section).

MTP2_CTRL_FLOWCTL_OFF
Returns all links to the non-congested state.

Return Values

MTP2_SUCCESS
MTP2_BOARDInvalid board number specified. board must be from 1 to MAXBOARD (currently 8).
MTP2_HANDLEMtp2MgmtInit was never called for specified board.
MTP2_PARAMInvalid action specified. Must be one of those defined above in the action parameter description.

Details

There is currently one classification: flow control requests.

(Page 6 of 9 in this chapter) Version

tech_support@nmss.com

Copyright © 2000, Natural MicroSystems, Inc. All rights reserved.