(Page 2 of 2 in this chapter)

AG Board Locate Utility: blocate

Options	Description
pci_bus pci_slot	Specifies the PCI bus and slot location of the board on which to flash an LED.

Displays the PCI bus and PCI slot number for all NMS PCI boards installed in the system.

To run blocate, enter:
blocate
The output will be similar to the following:
Thu Aug 13 15:51:22 There was 1 NMS PCI card detected
BUS SLOT INTERRUPT 00 14 0xf
The board configuration is also logged to the ASCII text file with the current date and time. The file nmspci.rpt is created in the current working directory.
To flash an LED on a specific NMS PCI board, call blocate with the PCI bus and PCI slot locations. For example:
blocate 0 14
The following will be displayed:
Flashing LED for NMS PCI board on bus 0 slot 14
The board locator LED on the board will flash. Figure 33. Board Locate Indicator

agmon should not be running when executing the AG board locate utility. If agmon is running, an error message will be generated and the utility will exit.

(Page 2 of 2 in this chapter)