(Page 1 of 1 in this chapter) Version

About This Manual

The AG 2000 Installation & Developer's Manual explains how to configure and install an AG 2000 board, and how to verify that it has been installed correctly and is operating correctly. It also provides some general information about developing an application that uses this telephony board.
This manual is targeted to developers of telephony and voice applications who are using the AG 2000 board with CT Access. This manual defines telephony terms where applicable, but assumes that the reader is familiar with telephony concepts, switching, and the C programming language.
This manual is organized as follows:

For...

See...

An overview of the AG 2000 board and related software components, and a summary of the installation process

Chapter 1 - Overview of the AG 2000 Board

Instructions for configuring the hardware and installing it in your computer

Chapter 2 - Installing the Hardware

Instructions for editing your AG configuration file so it properly reflects your setup

Chapter 3 - Editing the AG Configuration File

Verification procedures to check your installation

Chapter 4 - Verifying the Installation

An overview of MVIP switching concepts and switch models

Chapter 5 - Using MVIP Switching

Information about retrieving the line gain

Chapter 6 - AG 2000 Configuration Parameters

An overview of the AG 2000 E&M board

Chapter 7 - AG 2000 E&M Board

Glossary of terms

Appendix A - Glossary

Detailed information about line interface signaling (for reference purposes only)

Appendix B - Line Interface Signaling

Specifications for the AG 2000 board and signaling modules

Appendix C - Hardware Specifications

Details about the board locate utility

Appendix D - Utility

For...	See...
An overview of the AG 2000 board and related software components, and a summary of the installation process	Chapter 1 - Overview of the AG 2000 Board
Instructions for configuring the hardware and installing it in your computer	Chapter 2 - Installing the Hardware
Instructions for editing your AG configuration file so it properly reflects your setup	Chapter 3 - Editing the AG Configuration File
Verification procedures to check your installation	Chapter 4 - Verifying the Installation
An overview of MVIP switching concepts and switch models	Chapter 5 - Using MVIP Switching
Information about retrieving the line gain	Chapter 6 - AG 2000 Configuration Parameters
An overview of the AG 2000 E&M board	Chapter 7 - AG 2000 E&M Board
Glossary of terms	Appendix A - Glossary
Detailed information about line interface signaling (for reference purposes only)	Appendix B - Line Interface Signaling
Specifications for the AG 2000 board and signaling modules	Appendix C - Hardware Specifications
Details about the board locate utility	Appendix D - Utility

Related Documents

For more information, refer to the following manuals: This manual... Provides... CT Access Developer's Reference Manual An overview of CT Access and a reference of functions, events, reason codes, and errors. CT Access Installation Manual An installation procedure for CT Access and a procedure for verifying your installation. Natural Access installation booklet An overview of the Natural Access CD. AG Runtime Configuration and Developer's Manual Information about the AG configuration file, agmon, AG board and driver error messages, and AG task processors. Getting Started With MVIP Switching An overview of MVIP-90 and MVIP-95 switching. AG CAS for Natural Call Control Installation and Developer's Manual Information about using AG CAS protocols to perform NCC service call control.
Refer to the following manuals for information about CT Access services: ADI Service Developer's Manual ADI Service Function Reference Switching Service Developer's Reference Voice Message Service Developer's Reference Natural Call Control Service Developer's Reference Manual

This manual...	Provides...
CT Access Developer's Reference Manual	An overview of CT Access and a reference of functions, events, reason codes, and errors.
CT Access Installation Manual	An installation procedure for CT Access and a procedure for verifying your installation.
Natural Access installation booklet	An overview of the Natural Access CD.
AG Runtime Configuration and Developer's Manual	Information about the AG configuration file, `agmon`, AG board and driver error messages, and AG task processors.
Getting Started With MVIP Switching	An overview of MVIP-90 and MVIP-95 switching.
AG CAS for Natural Call Control Installation and Developer's Manual	Information about using AG CAS protocols to perform NCC service call control.

(Page 1 of 1 in this chapter) Version

tech_support@nmss.com