(Page 1 of 1 in this chapter)

About This Manual

This manual explains how to configure and install an S Connect With Ringing board, and how to install the driver software under various operating systems. The manual also explains how to control the board using CT Access, and documents the demonstration scripts that come with the driver software.
This manual is organized as follows: For... See... An overview of the S Connect With Ringing family of products Chapter 1 : Introduction Instructions on configuring the hardware and installing it in your computer Chapter 2 : Installing the Hardware Procedures for installing the driver software under various operating systems Chapter 3 : Installing the Driver Software Verification procedures to determine that your installation is operational Chapter 4 : Verifying the Installation Information on configuring the S Connect With Ringing for MVIP bus switching Chapter 5 : AG Connect Switching Information on commands you can use to configure and control the S Connect With Ringing driver software Chapter 6 : Line Interface Operations Documentation of the demonstration programs that come with S Connect With Ringing Chapter 7 : Demonstration Programs A glossary of terms Appendix A : Glossary Information on how to interpret and control signaling at the S Connect With Ringing line interfaces Appendix B : Line Interface Signaling Instructions for removing the driver software from your computer Appendix C : Removing the Software Hardware specifications for the S Connect With Ringing board Appendix D : Hardware Specifications

For...	See...
An overview of the S Connect With Ringing family of products	Chapter 1 : Introduction
Instructions on configuring the hardware and installing it in your computer	Chapter 2 : Installing the Hardware
Procedures for installing the driver software under various operating systems	Chapter 3 : Installing the Driver Software
Verification procedures to determine that your installation is operational	Chapter 4 : Verifying the Installation
Information on configuring the S Connect With Ringing for MVIP bus switching	Chapter 5 : AG Connect Switching
Information on commands you can use to configure and control the S Connect With Ringing driver software	Chapter 6 : Line Interface Operations
Documentation of the demonstration programs that come with S Connect With Ringing	Chapter 7 : Demonstration Programs
A glossary of terms	Appendix A : Glossary
Information on how to interpret and control signaling at the S Connect With Ringing line interfaces	Appendix B : Line Interface Signaling
Instructions for removing the driver software from your computer	Appendix C : Removing the Software
Hardware specifications for the S Connect With Ringing board	Appendix D : Hardware Specifications

Related Documents

For more information, refer to the following manuals: This manual... Provides... Conferencing Developer's Reference Manual A complete description of the NMS conferencing model and the driver commands used to set or retrieve conferencing parameters, get status information, or release conference resources. CT Access Developer's Reference Manual An overview of CT Access and a reference of functions, events, reason codes, and errors. CT Access Installation Manual A description of the installation of the software from the distribution media and the configuration file. It also provides a procedure for verifying your installation. Natural Access installation booklet An overview of the Natural Access CD, and instructions on installing software from the CD. AG Runtime Configuration and Developer's Manual Information about the AG configuration file, agmon, AG board and driver error messages, and AG task processors. Getting Started With MVIP Switching An overview of MVIP-90 and MVIP-95 switching. MVIP-95 Device Driver Standard Information about MVIP-95, available from GO-MVIP. MVIP-90 Standard Information about MVIP-90, available from GO-MVIP.

For GO-MVIP information, please contact: GO-MVIP, Inc. 3220 N Street, NW, Suite 360 Washington, DC 20007 Tel: 800-NOW-MVIP (US and Canada) Tel: 903-769-3717; Fax: 903-769-3818 Email: info@mvip.org

This manual...	Provides...
Conferencing Developer's Reference Manual	A complete description of the NMS conferencing model and the driver commands used to set or retrieve conferencing parameters, get status information, or release conference resources.
CT Access Developer's Reference Manual	An overview of CT Access and a reference of functions, events, reason codes, and errors.
CT Access Installation Manual	A description of the installation of the software from the distribution media and the configuration file. It also provides a procedure for verifying your installation.
Natural Access installation booklet	An overview of the Natural Access CD, and instructions on installing software from the CD.
AG Runtime Configuration and Developer's Manual	Information about the AG configuration file, `agmon`, AG board and driver error messages, and AG task processors.
Getting Started With MVIP Switching	An overview of MVIP-90 and MVIP-95 switching.
MVIP-95 Device Driver Standard	Information about MVIP-95, available from GO-MVIP.
MVIP-90 Standard	Information about MVIP-90, available from GO-MVIP.

(Page 1 of 1 in this chapter)

tech_support@nmss.com