(Page 1 of 1 in this chapter) Version


Chapter 1

About the TX 3220


1.1 About the TX 3220 Board
1.1.1 Interoperability with MVIP-90

1.1 About the TX 3220 Board

The TX 3220 board is part of the TX series of telephony boards. The TX 3220 design is based on an intelligent Communication Processor (CP) which plugs into a single PCI bus slot. The CP cooperates with the PCI bus host processor to form a distributed communications application platform.

The CP features a high-performance 68060 and four 68360 Quad Integrated Communication Controllers (QUICC) with a 32-bit PCI bus interface.

The TX 3220 board CP is software programmable for use with the Signaling System 7 (SS7) networking software packages.

Figure 1. TX 3220 Board with Dual T1 and Ethernet Daughterboards


The TX 3220 board provides:

1.1.1 Interoperability with MVIP-90

The TX 3220 is located in a PCI bus slot and connects to the H.100 telephony bus. MVIP-90 and H-MVIP boards connect to the MVIP-90 bus and are typically located in ISA bus slots.

The MVIP Bus Adapter connects the H.100 bus to the MVIP-90 bus located in the same computer chassis as shown in Figure 2.

Figure 2. H.100 Bus Interoperability with MVIP-90 Bus



(Page 1 of 1 in this chapter) Version


tech_support@nmss.com
Copyright © 2000, Natural MicroSystems, Inc. All rights reserved.