(Page 1 of 1 in this chapter)
A
- Address statement 32
- addresses 73
- ADI.EAM.ANInumber 215, 259
- ADI.EAM.DIDBeforeANI 215, 259
- ADI.EAM.DIDnumber 215, 259
- ADI.EUC.digitnumber 191, 197, 221, 226, 232, 236, 239, 253, 265, 269
- ADI.MFC.ANInumber 94, 174-175
- ADI.MFC.DIDBeforeANI 94, 174
- ADI.MFC.DIDnumber 92, 174-175, 246
- ADI_CALL_STATUS 59, 72
- ADI_CALLCTRL_PARMS 45-46, 49-51, 66
- ADI_CC_BLOCK_MAKEBUSY 85
- ADI_CC_REPTALERTING 45, 66
- ADI_CC_REPTANSWERED 45-46, 49, 66
- ADI_CC_REPTBILLING 50
- ADI_CC_REPTDIGITS 50
- ADI_CC_REPTPROCEEDING 45, 66
- ADI_CC_REPTSEIZURE 50-51
- ADI_DIS_REMOTE_ABANDONED 62
- ADI_PLACECALL_PARMS 45-46, 49, 63, 67
- ADI_REASON_FINISHED 39, 48
- ADI_REJ_HOST_TIMEOUT 44, 47, 60-62
- ADI_REJ_PLAY_BUSY 47, 62
- ADI_REJ_PLAY_REORDER 47, 62, 85
- ADI_REJ_PLAY_RINGTONE 62
- ADI_REJ_USER_AUDIO 47, 62, 85
- adiAnswerCall 43-44, 60-62
- adiBlockCalls 44, 84
- ADIERR_NOT_ENOUGH_RESOURCES 48
- ADIEVN_ANSWERING_CALL 44
- ADIEVN_CALL_CONNECTED 44-46, 49
- ADIEVN_CALL_DISCONNECTED 44-47, 49, 62
- ADIEVN_CALL_PROCEEDING 45
- ADIEVN_CALL_RELEASED 47
- ADIEVN_CALLS_BLOCKED 44, 84
- ADIEVN_CALLS_UNBLOCKED 49, 85
- ADIEVN_IN_SERVICE 50
- ADIEVN_INCOMING_CALL 44, 55-56, 59, 152, 173, 197, 214, 226, 236, 245, 259, 269
- ADIEVN_INCOMING_DIGIT 51
- ADIEVN_REJECTING_CALL 44, 47, 62
- ADIEVN_REMOTE_ALERTING 45
- ADIEVN_REMOTE_ANSWERED 45-46, 49
- ADIEVN_SEIZURE_DETECTED 51, 55
- ADIEVN_STARTPROTOCOL_DONE 39, 48
- adiGetCallStatus 44, 50, 59
- adiPlaceCall 45, 51
- placing outbound call with 63, 67
- adiRejectCall 47, 62, 85
- adiReleaseCall 47
- adiStartProtocol 36, 38, 45-46, 48-51, 55, 66, 85
- initializing TCP with 38
- related events 39
- adiUnBlockCalls 44, 49, 84-85
- adsir.dsp 125
- AG board driver software
- CT Access app 10
- described 9
- AG configuration file
- agmon search path for 28
- creating 28
- described 9, 11
- examples 32
- filenames 16
- installation 16
- sample 28
- AG-E1
- described 4
- example AG configuration file 32
- runfile for 32
- sample configuration file 29
- AGLOAD environment variable 28
- agmon
- described 9, 11
- loads TCP 7
- AG-T1
- described 4
- runfile for 32
- A-law
- DSP program files 30, 32
- answering inbound calls 58
- Automatic Number Identification (ANI)
- described 173, 214, 245, 259
- determining number TCP expects 94, 174
- retrieving 173, 214, 245, 259
- retrieving using adiGetCallStatus 73
B
- bearer channel
- starting up TCP on 38
- blocking and unblocking calls 84
- blocking methods 85
- incoming calls 84
- process 84
- unblocking method 85
- Board x statement 30, 32
- busy tone
- event indicating detection 67
C
- cable 4
- call 46, 49
- call answering
- call connected 44, 61
- remote party answers 44
- remote party doesn't answer 44
- remote party hangs up 61
- TCP answering inbound call 44, 61
- using adiAnswerCall 44, 61
- wait times out 61
- call blocking
- completion 84
- described 84
- methods 84
- call control
- blocking and unblocking calls 84
- determining state using adiGetCallStatus 73
- functions and events 43
- operations supported by CAS TCPs 42
- transferring a call 125, 142
- unsolicited events 50
- call placement
- if call request is rejected 63
- if network connection is established 63
- initiating 67
- procedure 63
- using adiPlaceCall 63
- call rejection
- and connectmask/disconnectmask 67
- inbound call is rejected by adiRejectCall 47
- outbound call is not answered 45
- outbound call is rejected by remote party 45
- using adiRejectCall 47
- CCMode 34
- CID type 126
- CIDalertmaxtime 126
- cidsupport 125, 181
- cleardownflag 123
- ClockRef statement 33
- connectmask 63, 67
- connstring 126
- context
- starting TCP on 36
- CT Access
- switching under 10
- CTA context
- starting TCP on B channel contexts 38
- ctaSetParmByName 37
D
- defaulttone 139, 144, 150
- detectmode 139, 144, 150
- developer support xi
- dialing
- completion 45-46, 49
- events 45-46, 49
- dialtonemintime 124, 181
- dialtonewaittime 124, 181
- digit string
- parameters controlling 174, 215, 246, 259
- retrieving all digits at once 59
- retrieving all digits individually as they arrive 59
- retrieving using adiGetCallStatus 73
- submitting 63
- syntax 73
- Direct Inward Dial (DID)
- described 173, 214, 245, 259
- determining number TCP expects 92, 94, 174, 246
- retrieving 173, 214, 245, 259
- disconnectmask 63, 67
- driver
- MVIP 10
- DSP files
- for caller ID 125
- DSP program files
- CT Access app 10
- specifying in AG configuration file 30, 32
- DspFile statement 30, 32
E
- E-1
- capacity 3
- described 3
- regions of use 3
- EAM
- described 5-6
- establishing outbound calls 216
- retrieving all digits at once 214, 259
- retrieving digits as they arrive 215, 260
- trunk control program 14
- EnableMVIP statement 33
- End Board statement 31, 33
- establishing outbound calls 63
- call set up events 66
- state diagram 64, 81
- EUC
- described 6
- establishing outbound calls 197
- retrieving all digits at once 197, 269
- European Digital CAS
- trunk control program 14
- events
- informational 42
- solicited 42
- summary 42
- unsolicited 50
F
- freqdeglitchtime 124
- freqringhigh 123
- freqringlow 123
- freqringperiods 124
- freqtolerance 124
G
- glare 46, 49
- ADIEVN_PLACING_CALL event 45
H
- hang 46, 49
- hang up
- remote party hangs up 45, 58
I
- IdleCode statement 30, 33, 39
- inbound call
- blocking 84
- event announcing 58
- installing protocol software 22
- interringmaxtime 124, 181
- Interrupt statement 32
- IWK
- described 6
- establishing outbound calls 226
- retrieving all digits at once 152, 226, 236
- retrieving digits as they arrive 226
- trunk control program 14
K
- KP 138, 141, 143, 147-149, 151
L
- LineCode statement 33
- loop start 4
M
- MFC-R2
- described 5
- establishing outbound calls 175
- retrieving all digits at once 173
- retrieving digits as they arrive 162, 173, 175, 193, 205, 214, 222, 233, 242, 255, 259, 266
- trunk control program 14
- mfflags 138, 143, 147, 149
- mfkpstampl 141, 148, 151
- mfkpstofftime 141, 148, 151
- mfkpstontime 141, 148, 151
- minwinktime 140-141, 147, 151
- mu law
- DSP program files 30, 32
- MVIP
- described 4
- switching under CT Access 10
N
- Natural Media 10
- nodialtoneaction 125, 181
- noresourcemode 141, 146, 152
- numdigits 139, 144, 149
- numrings 124, 181
O
- OS/2
- agmon search path for AG configuration file 28
- outbound calls
- cannot be sent on blocked port 84
P
- parameter file
- described 8
- loading 8
- parameters
- EAM digit handling 174, 246
- EUC digit handling 174, 246
- MFC-R2 digit handling 174, 246
- PCI bus 30
- PCIbus 34
- PCIslot 34
- polaranswertime 126
- predialtime 141, 147, 151
- prewinktime 140, 150
- protocol
- described 5
- successful startup 48
- supported 5
- protocol software
- contents 5
- described vii, 5
- package contents 13
- uninstalling under UNIX 26
Q
- Quad T1/E1
- described 4
- media functions 39
- resource management 39, 48
- sample configuration file 34
- TCP mediamask setting 48
- qualaddroff 138, 143, 147, 149
- qualaddron 138, 143, 147, 149
- qualdisconnect 138, 143, 147, 149
- qualloopoff 123, 181
- qualpermsignal 138, 143, 147, 149
- qualreversal 126
- qualringoff 123, 181
- qualringon 123, 181
R
- R1.5
- described 6
- establishing outbound calls 247, 260
- responding to inbound calls 245-246
- retrieving digits all at once 245
- retrieving digits one at a time 246
- trunk control program 14
- readme files 24
- relaytype 126
- releaseguardtime 125, 141, 148, 151, 182
- releasing calls
- adiReleaseCall 47
- success 47, 58
- reorder tone
- event indicating detection 67
- responding to inbound calls
- accepting calls 61
- call sequence and events 55, 58
- events 55
- rejecting calls 62
- retrieving incoming digits 59
- retrieving incoming digits 59
- reversalmode 125
- ring tone
- rejecting call with 62
- ringdetectmode 123
- ringing
- in adiAnswerCall 44
- remote is ring 44
- remote ringing 45
- ringofftime 140, 145, 150
- ringontime 140, 144-145, 150
- ringsigmaxtime 124, 182
- ringsigmintime 124, 182
- runfile
- CT Access app 10
- described 9
- statement 32
- RunFile statement 32
S
- seizure 55, 58
- solicited events 42
- Special Information Tone (SIT)
- event indicating detection 67
- SS5
- described 6
- establing outbound calls 236
- parameters 232, 253
- responding to inbound calls 236
- retrieving all digits at once 236
- retrieving digits one at a time 236
- trunk control program 14
- ST 141, 148, 151
- subaddresses
- retrieving 73
- swish 10
T
- T-1
- capacity 3
- described 3
- regions of use 3
- TCP
- installing software 22
- statement 32
- timer
- waiting call times out 44, 47
- toll category
- described 173, 214
- retrieving 173, 214
- tone
- call progress 36
- Trunk Control Program (TCP)
- available TCPs 14
- behavior if app terminates 39
- described 7, 10
- file names 38
- multiple 7
- specifying in AG configuration file 32
- starting on B channel context 38
- successful startup 48
U
- unblocking calls
- adiUnblockCalls 49, 85
- description 85
- events 49, 85
- UNIX
- agmon search path for AG configuration file 28
- uninstalling protocol software 26
- unsolicited events
- described 50
- list of 50
- user category
- default 176, 216
- described 173, 214, 245, 259
- digit string 175, 216, 247, 260
- retrieving 173, 214, 245, 259
- syntax of outgoing string 176
- syntax of outgoing string if omitted 216, 247, 260
W
- wait1stdigittime 140, 145, 151
- waitfordigitstime 140, 145, 151
- waitforPCtime 139, 144, 150
- Windows NT
- agmon search path for AG configuration file 28
- winktime 139, 144, 150
- winkwaittime 140, 147, 151
X
- xferstring 126, 142
- xfersupport 125, 142, 182
Z
- zero code suppression algorithm 33
(Page 1 of 1 in this chapter)
tech_support@nmss.com
Copyright © 1999, Natural MicroSystems, Inc. All rights
reserved.