(Page 1 of 1 in this chapter)

Chapter 2

Installing and Removing Protocol Software

This chapter describes how to install the AG CAS product under Windows NT and UNIX.
You can install AG CAS software in any of the following ways: From the Natural Microsystems Natural Access CD-ROM, using the Natural Access setup program. If you are installing the software this way, refer to the booklet that comes with the CD-ROM for installation instructions. From the Natural Access CD-ROM, using the setup program on the CD- ROM that is specific to the AG CAS software package. If you are installing the software this way, refer to the procedures in this chapter for installation instructions. From a package downloaded from the NMS web site (www.nmss.com). To install the software this way, follow the instructions on the web site to download and uncompress the package. Then refer to the procedures in this chapter for installation instructions.
This chapter describes how to install AG CAS alone. However, keep in mind that AG CAS requires some of the software contained in the Natural Access CD to operate. Note: Before installing a new version of the AG CAS software, make sure you have removed any previous versions.

This procedure describes how to install the AG CAS software for UnixWare 2.1, UnixWare 7, or Solaris 2.6. This procedure is applicable if you wish to install from: An AG CAS package downloaded from the NMS web site, or The Natural MicroSystems Natural Access CD-ROM, using the installation script on the CD-ROM specific to AG CAS.
You can also use the Natural Access installation script to install this package from the CD-ROM. To learn how to install the software this way, refer to the booklet that comes with the CD-ROM for installation instructions. Access a command prompt, and log in as root. Insert the Natural Access installation CD into the CD ROM drive. For UnixWare, mount the CD by typing mount -F cdfs -r /dev/cdrom/c1* mountdirectory where mountdirectory is your chosen mount directory. Solaris auto-mounts the CD when it detects its existence, or you can mount it from the desktop by double-clicking on the appropriate icon. The Solaris mount directory is /cdrom/cdrom0. Start the installation script by typing: pkgadd -d mountdirectory ag-cas Specify The protocol(s) you want to install (for some protocols you are required to specify the country of operation). The installation program copies software files from the CD to the designated drive. Unmount the CD directory my typing: umount mount directory
When you finish installing protocol software, edit the appropriate AG configuration (ag.cfg) file as described in Chapter 3.

This chapter describes procedures for removing protocol software under the following operating systems: Windows NT 4.0 Unix (UnixWare 2.1 or later and Solaris 2.6 or later)

Remove AG CAS Protocol software from your system with the Windows NT Add/Remove Programs applet. Note: Before removing AG CAS software, ensure there are no applications running that use the software.
To remove AG CAS Protocol software: Log on as a member of the Administrators group. From the Windows NT Start menu, click Settings, then Control Panel. The Windows NT Control Panel appears. Double-click on the Add/Remove Programs icon. Select the Natural MicroSystems AG CAS software package, and click Add/Remove button. Follow the removal prompts (if any) that appear.

Before removing CAS protocol software make sure no applications are running that use the software.
To remove international protocol software from a UNIX system: Log in as root. From a supervisory account, enter: pkgrm AG-CAS. pkgrm displays the following prompt: The following package is currently installed: Natural MicroSystems AG CAS 2.0 for Unixware 2.x Do you want to remove this package? [y,n,?,q] or, The following package is currently installed: Natural MicroSystems AG CAS 2.0 for Unixware 7 Do you want to remove this package? [y,n,?,q] or, The following package is currently installed: Natural MicroSystems AG CAS 2.0 for (i386) Solaris Do you want to remove this package? [y,n,?,q] Enter y. After the removal is complete, the uninstall program displays the following confirmation: Removal of AG CAS was successful. Exit the root shell.

(Page 1 of 1 in this chapter)