(Page 1 of 1 in this chapter) Version

About This Manual

The TX 3220C Installation Manual explains how to install and configure a TX 3220C board .
This manual is organized as follows: For... See... An overview of the TX 3220C board Chapter 1 - TX 3220C Instructions for configuring the hardware and installing it in your computer Chapter 2 - Installing a TX 3220C Board Instructions for configuring the TX 3220C software Chapter 3 - Configuring the Software Instructions on ensuring you have the latest version of the firmware Chapter 4 - Updating the Firmware Verification procedures to check your installation Chapter 5 -Verifying the Installation A glossary of related terms. Appendix A - Glossary Specifications of the TX 3220C hardware Appendix B - Hardware Specifications

For...	See...
An overview of the TX 3220C board	Chapter 1 - TX 3220C
Instructions for configuring the hardware and installing it in your computer	Chapter 2 - Installing a TX 3220C Board
Instructions for configuring the TX 3220C software	Chapter 3 - Configuring the Software
Instructions on ensuring you have the latest version of the firmware	Chapter 4 - Updating the Firmware
Verification procedures to check your installation	Chapter 5 -Verifying the Installation
A glossary of related terms.	Appendix A - Glossary
Specifications of the TX 3220C hardware	Appendix B - Hardware Specifications

Related Documents

For more information, refer to the following manuals: This manual... Provides... Signaling System 7 (SS7) Installation and Configuration Manual Information on the installation, configuration, and operation of the SS7 software for the TX Communications Processors. SS7 MTP Layer 3 Developer's Manual Instructions on creating applications that make use of the SS7 MTP Layer 3 functionality. SS7 SCCP Developer's Manual A description of the functions and signalling procedures supported by the SCCP API. SS7 TCAP Developer's Manual Information for developing applications which utilize the transaction capabilities of the SS7 network. SS7 ISDN User Part Developer's Manual A description of the functions and signaling procedures supported by the SS7 ISUP product. SS7 Telephone User Part Developer's Manual A description of the functions and signaling procedures supported by the TUP API. SS7 MTP Layer 2 Developer's Manual Instructions on creating applications that make use of the SS7 MTP Layer 2 functionality. CompactPCI Computer Telephony Specification PICMG 2.5 R1.0 Information about the telephony back plane in CompactPCI, available from PICMG. CompactPCI Specification PICMG 2.0 R2.1 Specification information about CompactPCI, available from PICMG. Enterprise Computer Telephony Forum H.110 Revision 1.0 Hardware Compatibility Specification: CT Bus Information about the H.110 telephony bus, available from ECTF. Hot Swap Specification PICMG 2.1 R1.0 Information about Hot Swap, available from PICMG. IEEE 1101.1, IEEE 1101.10, IEEE 1101.11 Mechanical specifications referenced in CompactPCI specifications.
CompactPCI standards and specifications are maintained by the PCI Industrial Computers Manufacturers Group (PICMG). For CompactPCI information, please contact: PICMG c/o Rogers Communications 401 Edgewater Place, Suite 500 Wakefield, MA 01880 Tel: 781-246-9318 Fax: 781-224-1239 Email: www.picmg.org

For ECTF information, please contact: ECTF 39355 California Street, Suite 307 Fremont, CA 94538 Tel: 501-608-5915 Fax: 510-608-5917 Email: ectf@ectf.org

This manual...	Provides...
Signaling System 7 (SS7) Installation and Configuration Manual	Information on the installation, configuration, and operation of the SS7 software for the TX Communications Processors.
SS7 MTP Layer 3 Developer's Manual	Instructions on creating applications that make use of the SS7 MTP Layer 3 functionality.
SS7 SCCP Developer's Manual	A description of the functions and signalling procedures supported by the SCCP API.
SS7 TCAP Developer's Manual	Information for developing applications which utilize the transaction capabilities of the SS7 network.
SS7 ISDN User Part Developer's Manual	A description of the functions and signaling procedures supported by the SS7 ISUP product.
SS7 Telephone User Part Developer's Manual	A description of the functions and signaling procedures supported by the TUP API.
SS7 MTP Layer 2 Developer's Manual	Instructions on creating applications that make use of the SS7 MTP Layer 2 functionality.
CompactPCI Computer Telephony Specification PICMG 2.5 R1.0	Information about the telephony back plane in CompactPCI, available from PICMG.
CompactPCI Specification PICMG 2.0 R2.1	Specification information about CompactPCI, available from PICMG.
Enterprise Computer Telephony Forum H.110 Revision 1.0 Hardware Compatibility Specification: CT Bus	Information about the H.110 telephony bus, available from ECTF.
Hot Swap Specification PICMG 2.1 R1.0	Information about Hot Swap, available from PICMG.
IEEE 1101.1, IEEE 1101.10, IEEE 1101.11	Mechanical specifications referenced in CompactPCI specifications.

(Page 1 of 1 in this chapter) Version

tech_support@nmss.com