(Page 1 of 1 in this chapter) Version


Appendix A

Hardware Specifications


General Features
Host Interface
H.110 Compliant Interface
Environment
Power Requirements
Compliance and Regulatory Certification

General Features
Feature

Specification

TDM Bus

Features one complete H.110 bus interface

Microprocessor

One 66 MHz Motorola 68060 processor

Communication Controllers

Four 33 MHz Motorola 68360 Quad Integrated Communication Controllers (QUICC)

Software Requirements

TX Base/Device Driver 4.1 Build 7 or later for Windows NT, Intel Solaris, SPARC Solaris, or UnixWare 7.

Host Interface
Feature

Specification

Electrical

CompactPCI bus designed to CompactPCI PICMG 2.0 specification revision 2.1

Mechanical

Designed to CompactPCI PICMG 2.0 specification revision 2.1 for 6U style cards

Bus Speed

DC to 33 MHz

Max No. Boards per Chassis

16

Max No. Ports per Chassis

16

I/O Mapped Memory

Memory mapped interface for efficient block data transfers.

Addresses/Interrupts

Address and interrupts automatically configured by CompactPCI BIOS (no jumpers or switches)

H.110 Compliant Interface
H.110 Compliant Interface

Flexible connectivity between T1/E1 trunks and H.110 bus

Switchable access to any of 4096 H.110 timeslots

H.110 clock master or clock slave (software selectable)

Compatible with any H.110

Environment
Feature

Specification

Operating Temperature

0 to 50 degC

Storage Temperature

-20 to 70 degC

Humidity

5 to 80%, non-condensing

Power Requirements
Power Requirements

Max 1.65 Amps per board @ +5 V

Max 1.34 Amps per board @ +3.3 V

Compliance and Regulatory Certification

Natural MicroSystems obtains board-level approvals certificates for supported countries. In some countries you will require, in addition to the approval obtained by NMS for the board and its associated software, a system level approval before connecting the system to the public network. To learn what approvals you require, contact the appropriate regulatory authority in the target country
T1 Version

EMC

US and Canada

FCC Part 15, Subpart J (Class B with unshielded cable)

Safety

Canada

NRTL recognized to cUL, UL 1950, 3rd edition

Telecom

US

Canada

FCC Part 68

ISC CS-03

.

:
E1 Version

EMC

EU countries

Australia

EN 55022: (1994 + Amendment 1 and ferrite): Class B (with unshielded cable)

AS/NZS 3548

Safety

EU countries

Australia

EN 60950: (1992 + Amendments 1 to 4)

TS 001 (1996)

AS/NZS 3260 (1993)



(Page 1 of 1 in this chapter) Version


tech_support@nmss.com
Copyright © 2001, Natural MicroSystems, Inc. All rights reserved.