(Page 2 of 4 in this chapter) Version

AG Board Locate Utility: blocate

Options	Description
pci_bus pci_slot	Specifies the CompactPCI bus and slot location of the board on which to flash an LED.

Displays the CompactPCI bus and CompactPCI slot number for all NMS CompactPCI boards installed in the system. Also, flashes the red alarm LED for trunk 1 on a specified CompactPCI board.

To run blocate, enter:
blocate
The output will be similar to the following:
Thu Jul 10 15:51:22 There was 1 NMS PCI card detected
BUS SLOT INTERRUPT 00 14 0xf
The board configuration is also logged to an ASCII text file with the current date and time. The file pci_cfg.txt is created in the current working directory.
To flash an LED on a specific NMS CompactPCI board, call blocate with the CompactPCI bus and CompactPCI slot locations. For example:
blocate 0 14
The following will be displayed:
Flashing LED for NMS CompactPCI board on bus 0 slot 14
The board locator LED on the board will flash. Figure 36. Board Locate Indicator

agmon should not be running when executing the AG board locate utility. If agmon is running, an error message will be generated and the utility will exit.

(Page 2 of 4 in this chapter) Version