- To run showcx95 for AG boards, enter the following:
showcx95 agsw
- The following will be displayed for an AG 4000C board configured as board 0 with trunk channel 1 connected to local DSP resources (both voice and signaling):
agsw 0
L-17:00..23 <- L-00:00..23
L-01:00..23 <- L-16:00..23
L-19:00..23 <- L-02:00..23
L-03:00..23 <- L-18:00..23
In the showcx95 output, M indicates MVIP bus and L indicates Local bus.
- The showcx95 output shows three types of connections:
L-01:02 <- 0x7f
- Timeslots Local:00:00..04 are writing to timeslots Local:05:00..03.
L-05:00..03 <- L-00:00..04
- Timeslot MVIP:00:00 is writing to timeslot Local:01:00.
Timeslot Local:00:00 is writing to timeslot MVIP:01:00 (a duplex
connection).
M{00/01}:00 <-> L{01/00}:00
(Page 4 of 4 in this chapter) Version