(Page 1 of 1 in this chapter) Version

About This Manual

The Health Management Developer's Manual provides a detailed description of the health managment (HM) functionality, and explains how to develop redundant applications with it.
This manual is organized as follows: For... See... An overview of the redundancy/health management software, including basic system requirements for the redundancy/HM functionality Chapter 1 - Introduction A detailed description of the redundancy/HM software architecture Chapter 2 - Redundant Signaling Subsystem Architecture A detailed explanation of the health management API Chapter 3 - Health Management Interface A comprehensive reference of HMI functions Chapter 4 - Function Reference Information on developing redundant SS7 applications, including startup and switchover procedures. Chapter 5 - Developing Redundant Applications Instructions on configuring your hardware and software for redundancy applications Chapter 6 - Setting Up a Redundant System Glossary of terms Appendix A - Glossary A description of the RMG process, used for controlling a redundant board pair with the HMI Appendix B - RMG Sample Application A description of the isupdemo sample application Appendix C - ISUP Sample Application A description of the tcapdemo sample application Appendix D - TCAP Sample Application

For...	See...
An overview of the redundancy/health management software, including basic system requirements for the redundancy/HM functionality	Chapter 1 - Introduction
A detailed description of the redundancy/HM software architecture	Chapter 2 - Redundant Signaling Subsystem Architecture
A detailed explanation of the health management API	Chapter 3 - Health Management Interface
A comprehensive reference of HMI functions	Chapter 4 - Function Reference
Information on developing redundant SS7 applications, including startup and switchover procedures.	Chapter 5 - Developing Redundant Applications
Instructions on configuring your hardware and software for redundancy applications	Chapter 6 - Setting Up a Redundant System
Glossary of terms	Appendix A - Glossary
A description of the RMG process, used for controlling a redundant board pair with the HMI	Appendix B - RMG Sample Application
A description of the `isupdemo` sample application	Appendix C - ISUP Sample Application
A description of the `tcapdemo` sample application	Appendix D - TCAP Sample Application

Related Documents

For more information, refer to the following manuals: This manual... Provides... TX 2000/TX 3000 Installation Manual Information on installing and configuring the TX ISA boards and adapter daughterboards. TX 3220 Installation Manual Information on installing and configuring the TX PCI board and adapter daughterboards. TX 3220C Installation Manual Information on installing and configuring the TX CompactPCI board. Signaling System 7 (SS7) Installation and Configuration Manual Information on the installation, configuration, and operation of the SS7 Message Transfer Part (MTP) and optional ISDN User Part (ISUP), Telephone User Part (TUP), Signaling Connection Control Part (SCCP), and Transaction Capabilities Application Part (TCAP) software for the TX Communication Processors. SS7 MTP Layer 3 Developer's Manual Instructions on creating applications that make use of the SS7 MTP Layer 3 functionality. SS7 ISDN User Part Developer's Manual A description of the functions and signaling procedures supported by the SS7 ISUP product. SS7 SCCP Developer's Manual A description of the functions and signalling procedures supported by the SCCP API. SS7 TCAP Developer's Manual Information for developing applications which utilize the transaction capabilities of the SS7 network. CT Access Developer's Reference Manual An overview of CT Access and a reference for functions, events, reason codes, and errors. Hot Swap Developer's Manual An overview of CompactPCI and Hot Swap and how it interfaces with CT Access. Hot Swap Manager Developer's Reference Manual Details about the Hot Swap manager and a reference of the Hot Swap manager library functions.

This manual...	Provides...
TX 2000/TX 3000 Installation Manual	Information on installing and configuring the TX ISA boards and adapter daughterboards.
TX 3220 Installation Manual	Information on installing and configuring the TX PCI board and adapter daughterboards.
TX 3220C Installation Manual	Information on installing and configuring the TX CompactPCI board.
Signaling System 7 (SS7) Installation and Configuration Manual	Information on the installation, configuration, and operation of the SS7 Message Transfer Part (MTP) and optional ISDN User Part (ISUP), Telephone User Part (TUP), Signaling Connection Control Part (SCCP), and Transaction Capabilities Application Part (TCAP) software for the TX Communication Processors.
SS7 MTP Layer 3 Developer's Manual	Instructions on creating applications that make use of the SS7 MTP Layer 3 functionality.
SS7 ISDN User Part Developer's Manual	A description of the functions and signaling procedures supported by the SS7 ISUP product.
SS7 SCCP Developer's Manual	A description of the functions and signalling procedures supported by the SCCP API.
SS7 TCAP Developer's Manual	Information for developing applications which utilize the transaction capabilities of the SS7 network.
CT Access Developer's Reference Manual	An overview of CT Access and a reference for functions, events, reason codes, and errors.
Hot Swap Developer's Manual	An overview of CompactPCI and Hot Swap and how it interfaces with CT Access.
Hot Swap Manager Developer's Reference Manual	Details about the Hot Swap manager and a reference of the Hot Swap manager library functions.

(Page 1 of 1 in this chapter) Version

tech_support@nmss.com