(Page 1 of 1 in this chapter)


About This Manual


The TX 2000/TX 3000 Installation Manual explains how to install and configure a TX 2000 or TX 3000 board.

This manual is organized as follows:
For...

See...

An introduction to the TX products

Chapter 1- Introduction

Instructions for configuring the hardware and installing it on your computer

Chapter 2 - Installing the Hardware

Instructions on installing the TX Software on a TX 2000 or TX 3000 board

Chapter 3 - Installing the Software

Verification procedures to check your installation

Chapter 4 - Verifying the Installation

Configuration options for the V.35 pod

Chapter 5 - Pod Configuration

Descriptions, including configuartion options, of the daughtercards available for the TX 2000/TX 3000 boards

Chapter 6 - Adapter Cards and Cabling

Glossary of related terms

Appendix A - Glossary

Host requirements for the TX 2000/TX 3000 boards

Appendix B - Hardware Specifications

Related Documents

For more information, refer to the following manuals:

This manual...

Provides...

TX Series T1/E1 and MVIP Interface Adapters Developer's Manual

A description of the functions of the Dual T1/Dual E1 and MVIP Bus Interface Adapters and the software development tools available for building applications and systems based on the TX TDM processing facilities.



(Page 1 of 1 in this chapter)


tech_support@nmss.com
Copyright © 1999, Natural MicroSystems, Inc. All rights reserved.