Appendix A

Protocol Capabilities

The following tables show which capabilities (indicated by the capabilitymask) are supported by NMS CAS protocols.
The first table shows capabilities for the following protocols: Australian P2 (AP2) Pulsed E and M (EAM) European Digital CAS (EUC) European Digital CAS/Sweden (EUC/SWE) Feature Group D (FGD) Ground Start (GDS) Analog Loop Start (LPS)
The second table shows capabilities for the following protocols: MFC-R2 (MFC) MF-Socotel (MFS) Off-Premises Station (OPS) System R1.5 (R15) Signaling System 5 (SS5) Operator Workstation (OPS) Digital and Analog Wink Start (WNK)

The following table shows capability support for the indicated protocols: Capability AP2 EAM EUC EUC/SWE FGD GDS LPS NCC_CAP_ACCEPT_CALL Yes Yes Yes Yes Yes Yes Yes NCC_CAP_SET_BILLING No Yes No No No No No NCC_CAP_OVERLAPPED_SENDING Yes Yes Yes Yes Yes No No NCC_CAP_HOLD_CALL No No No No No Yes Yes NCC_CAP_SUPERVISED_TRANSFER No No No No No Yes Yes NCC_CAP_AUTOMATIC_TRANSFER No No No No No Yes Yes NCC_CAP_EXTENDED_CALL_STATUS No Yes No Yes Yes No Yes NCC_CAP_SEND_CALL_MESSAGE No No No No No No No NCC_CAP_SEND_LINE_MESSAGE No No No No No No No NCC_CAP_HOLD_IN_ANY_STATE No No No No No No No NCC_CAP_DISCONNECT_IN_ANY_STATE No No No No No No No NCC_CAP_MEDIA_IN_SETUP Yes Yes Yes Yes Yes No No NCC_CAP_CALLER_ID No Yes No Yes Yes No Yes¹ ¹ NCC_CAP_CALLER_ID capability is YES for France, Japan, and US, if the NCC.X.ADI_LPS.cidsupport parameter is set to 1. It is set to NO otherwise. Note: A Yes entry indicates the capability is supported for the protocol. A No entry indicates the capability is not supported for the protocol.

Capability	AP2	EAM	EUC	EUC/SWE	FGD	GDS	LPS
NCC_CAP_ACCEPT_CALL	Yes	Yes	Yes	Yes	Yes	Yes	Yes
NCC_CAP_SET_BILLING	No	Yes	No	No	No	No	No
NCC_CAP_OVERLAPPED_SENDING	Yes	Yes	Yes	Yes	Yes	No	No
NCC_CAP_HOLD_CALL	No	No	No	No	No	Yes	Yes
NCC_CAP_SUPERVISED_TRANSFER	No	No	No	No	No	Yes	Yes
NCC_CAP_AUTOMATIC_TRANSFER	No	No	No	No	No	Yes	Yes
NCC_CAP_EXTENDED_CALL_STATUS	No	Yes	No	Yes	Yes	No	Yes
NCC_CAP_SEND_CALL_MESSAGE	No	No	No	No	No	No	No
NCC_CAP_SEND_LINE_MESSAGE	No	No	No	No	No	No	No
NCC_CAP_HOLD_IN_ANY_STATE	No	No	No	No	No	No	No
NCC_CAP_DISCONNECT_IN_ANY_STATE	No	No	No	No	No	No	No
NCC_CAP_MEDIA_IN_SETUP	Yes	Yes	Yes	Yes	Yes	No	No
NCC_CAP_CALLER_ID	No	Yes	No	Yes	Yes	No	Yes¹

The following table shows capability support for the indicated protocols: Capability MFC MFS OPS R15 SS5 STA WNK NCC_CAP_ACCEPT_CALL Yes Yes Yes Yes Yes Yes Yes NCC_CAP_SET_BILLING Yes No No No No No No NCC_CAP_OVERLAPPED_SENDING Yes Yes No Yes Yes No Yes NCC_CAP_HOLD_CALL No No Yes No No Yes Yes NCC_CAP_SUPERVISED_TRANSFER No No Yes No No No Yes NCC_CAP_AUTOMATIC_TRANSFER No No Yes No No No Yes NCC_CAP_EXTENDED_CALL_STATUS Yes Yes No Yes No No No NCC_CAP_SEND_CALL_MESSAGE No No No No No No No NCC_CAP_SEND_LINE_MESSAGE No No No No No No No NCC_CAP_HOLD_IN_ANY_STATE No No No No No No No NCC_CAP_DISCONNECT_IN_ANY_STATE No No No No No No No NCC_CAP_MEDIA_IN_SETUP Yes Yes No Yes Yes Yes Yes NCC_CAP_CALLER_ID Yes Yes No Yes No No Yes Note: A Yes entry indicates the capability is supported for the protocol. A No entry indicates the capability is not supported for the protocol.

Capability	MFC	MFS	OPS	R15	SS5	STA	WNK
NCC_CAP_ACCEPT_CALL	Yes	Yes	Yes	Yes	Yes	Yes	Yes
NCC_CAP_SET_BILLING	Yes	No	No	No	No	No	No
NCC_CAP_OVERLAPPED_SENDING	Yes	Yes	No	Yes	Yes	No	Yes
NCC_CAP_HOLD_CALL	No	No	Yes	No	No	Yes	Yes
NCC_CAP_SUPERVISED_TRANSFER	No	No	Yes	No	No	No	Yes
NCC_CAP_AUTOMATIC_TRANSFER	No	No	Yes	No	No	No	Yes
NCC_CAP_EXTENDED_CALL_STATUS	Yes	Yes	No	Yes	No	No	No
NCC_CAP_SEND_CALL_MESSAGE	No	No	No	No	No	No	No
NCC_CAP_SEND_LINE_MESSAGE	No	No	No	No	No	No	No
NCC_CAP_HOLD_IN_ANY_STATE	No	No	No	No	No	No	No
NCC_CAP_DISCONNECT_IN_ANY_STATE	No	No	No	No	No	No	No
NCC_CAP_MEDIA_IN_SETUP	Yes	Yes	No	Yes	Yes	Yes	Yes
NCC_CAP_CALLER_ID	Yes	Yes	No	Yes	No	No	Yes

Want to send us feedback on our documentation? Email: Tech_Pubs@nmss.com