Table of Contents

Index

NMS Glossary

Previous Page

Next Page

(Page 11 of 39 in this chapter) Version

dsx1CircuitIdentifier

Syntax

DisplayString (SIZE 0..255)

Access

Read-write

OID

p.6.1.8.n, where n = the index number of the DS1 interface.

Description

Contains the circuit identifier, which is represented by:
name-of-board_board-number_trunk-number
where:
name-of-board is one of the following:

Board Type

Value

AG

AG_Dual_E1
AG_Dual_T1
AG_Quad_E1
AG_Quad_T1
AG_Quad_Connect_E1
AG_Quad_Connect_T1
AG_CPCI_Quad_E1
AG_CPCI_Quad_T1
AG_4000_Single_E1
AG_4000_Single_T1
AG_4000_Dual_E1
AG_4000_Dual_T1
AG_4000_Quad_E1
AG_4000_Quad_T1
AG_4000C_Dual_E1
AG_4000C_Dual_T1
AG_4000C_Quad_E1
AG_4000C_Quad_T1

CG

CG_6000_Quad
For CT Access 3.x, acceptable values are: Board Type Value AG Ag4000-Dual-T1 Ag4000-Quad-T1 Ag4000-T1 AgT1 Ag-Dual-T1 Ag-Quad-T1-Board Ag-Quad-T1-Connect Ag4000-Dual-E1 Ag4000-E1 Ag4000-Quad-E1 AgE1 Ag-Dual-E1 Ag-Quad-E1-Board Ag-Quad-E1-Connect
board-number is a two digit number, starting at 0.
trunk-number is a two digit number, starting at 0.
For example, board 0, trunk 3, is AG_4000_Single_E1_00_03.
The circuit identifier matches the boardModelText object in the Chassis MIB, which allows cross referencing DS1 interfaces between the two MIBs.

Configuration

Not applicable.

Table of Contents

Index

NMS Glossary

Previous Page

Next Page

(Page 11 of 39 in this chapter) Version

Want to send us feedback on our documentation? Email: Tech_Pubs@nmss.com

Copyright © 2000, Natural MicroSystems, Inc. All rights reserved.