(Page 13 of 39 in this chapter)
Version
dsx1LineStatus
Syntax
Integer (1..8191)
Access
Read-only
OID
p
.6.1.10.
n
, where
n
= the index number of the DS1 interface.
Description
Status of the interface. It contains loopback, failure, received alarm, and transmitted alarm information. Possible status values include:
Status
Value
Description
dsx1NoAlarm
1
No Alarm Present.
dsx1RcvFarEndLOF
2
Yellow Alarm.
Not supported.
dsx1XmtFarEndLOF
4
Near end sending LOF Indication.
Not supported.
dsx1RcvAIS
8
Far end sending AIS (blue).
Not supported.
dsx1XmtAIS
16
Near end sending AIS.
dsx1LossOfFrame
32
Near end LOF (Red Alarm).
dsx1LossOfSignal
64
Near end Loss Of Signal.
dsx1LoopbackState
128
Near end is looped.
dsx1T16AIS
256
E1 TS16 AIS.
dsx1RcvFarEndLOMF
512
Far End Sending TS16 LOMF.
Not supported.
dsx1XmtFarEndLOMF
1024
Near End Sending TS16 LOMF.
Not supported.
dsx1RcvTestCode
2048
Near End detects a test code.
dsx1OtherFailure
4096
Any interface status not defined.
Note:
Far end is not supported.
Configuration
Not applicable.
(Page 13 of 39 in this chapter)
Version
Want to send us feedback on our documentation? Email:
Tech_Pubs@nmss.com
Copyright © 2000, Natural MicroSystems, Inc. All rights reserved.
(Page 13 of 39 in this chapter) Version (Page 13 of 39 in this chapter) Version