(Page 15 of 39 in this chapter)
Version
dsx1TransmitClockSource
Syntax
Integer
Access
Read-write
OID
p
.6.1.12.
n
, where
n
= the index number of the DS1 interface.
Description
Source of the transmit clock, which the board uses for synchronization:
Type
Value
Description
loopTiming
1
The recovered receive clock of this interface is used as the transmit clock. Also know as slave.
localTiming
2
The recovered receive clock from another interface is used as the transmit clock. Also known as master.
throughTiming
3
A local clock source is used.
Configuration
This object is configured by editing the system configuration before starting the Chassis MIB agent.
(Page 15 of 39 in this chapter)
Version
Want to send us feedback on our documentation? Email:
Tech_Pubs@nmss.com
Copyright © 2000, Natural MicroSystems, Inc. All rights reserved.
(Page 15 of 39 in this chapter) Version (Page 15 of 39 in this chapter) Version