Table of Contents

Index

NMS Glossary

Previous Page

Next Page

(Page 21 of 39 in this chapter) Version

dsx1LoopbackStatus

Syntax

Integer (1...127)

Access

Read-only

OID

p.6.1.18.n, where n = the index number of the DS1 interface.

Description

Represents the current state of the loopback on the DS1 interface. It contains information about loopbacks established by a manager and remotely from the far end.
dsx1LoopbackStatus is a bit map represented as a sum; therefore, it can represent multiple loopbacks simultaneously.
The bit positions are: Bit Value 1 dsx1NoLoopback 2 dsx1NearEndPayloadLoopback 4 dsx1NearEndLineLoopback 8 dsx1NearEndOtherLoopback 16 dsx1NearEndInwardLoopback 32 dsx1FarEndPayloadLoopback 64 dsx1FarEndLineLoopback Note: The NMS SNMP agent always returns dsx1NoLoopback. Natural MicroSystems does not support loopback.

Configuration

Not applicable.

Table of Contents

Index

NMS Glossary

Previous Page

Next Page

(Page 21 of 39 in this chapter) Version

Want to send us feedback on our documentation? Email: Tech_Pubs@nmss.com

Copyright © 2000, Natural MicroSystems, Inc. All rights reserved.