(Page 31 of 39 in this chapter) Version
dsx1CurrentCSSs
Syntax
- Gauge
Access
- Read-only
OID
- p.7.1.6.n, where n = the index number of the DS1 interface.
Description
- Number of Controlled Slip Seconds.
- A Controlled Slip Second is a one-second interval containing one or more controlled slips.
- A Controlled Slip is the replication or deletion of the payload bits of a DS1 frame. A Controlled Slip may occur when there is a difference between the timing of a synchronous receiving terminal and the received signal. A Controlled Slip does not cause an Out of Frame error.
Configuration
- Not applicable.
(Page 31 of 39 in this chapter) Version
Want to send us feedback on our documentation? Email: Tech_Pubs@nmss.com
Copyright © 2000, Natural MicroSystems, Inc. All rights
reserved.