(Page 9 of 39 in this chapter)
Version
dsx1LineCoding
Syntax
Integer
Access
Read-write
OID
p
.6.1.6.
n
, where
n
= the index number of the DS1 interface
Description
Type of Zero Code Suppression used on the interface:
Type
Value
Description
dsx1JBZS
1
Jammed Bit Zero Suppression, in which the AT&T specification of at least one pulse every 8 bit periods is implemented by forcing a pulse in bit 8 of each channel. Only seven bits per channel, or 1.344 Mbps, is available for data.
dsx1B8ZS
2
Specified pattern of normal bits and bipolar violations which replace a sequence of eight zero bits.
dsx1HDB3
3
E1 links, with or without CRC, use
dsx1HDB3
or
dsx1AMI
.
dsx1ZBTSI
4
ANSI Clear Channels may use
dsx1ZBTSI
, or Zero Byte Time Slot Interchange.
dsx1AMI
5
Mode where no zero code suppression is present and the interface encoding does not solve the problem directly. In this application, the higher layer must provide data, which meets or exceeds the pulse density requirements, such as inverting HDLC data.
other
6
Unlisted (default).
Configuration
This object is configured by editing the system configuration file before starting the Chassis MIB agent.
(Page 9 of 39 in this chapter)
Version
Want to send us feedback on our documentation? Email:
Tech_Pubs@nmss.com
Copyright © 2000, Natural MicroSystems, Inc. All rights reserved.
(Page 9 of 39 in this chapter) Version (Page 9 of 39 in this chapter) Version