(Page 10 of 39 in this chapter)
Version
dsx1SendCode
Syntax
Integer
Access
Read-write
OID
p
.6.1.7.
n
, where
n
= the index number of the DS1 interface.
Description
Type of code being sent across the DS1 interface by the device:
Type
Value
Description
dsx1SendNoCode
1
Sending looped or normal data.
dsx1SendLineCode
2
Sending a request for a line loopback.
dsx1SendPayloadCode
3
Sending a request for a payload loopback.
dsx1SendResetCode
4
Sending a loopback termination request.
dsx1SendQRS
5
Sending a Quasi-Random Signal(QRS) test pattern.
dsx1Send511Pattern
6
Sending a 511 bit fixed test pattern.
dsx1Send3in24Pattern
7
Sending a fixed test pattern of 3 bits set in pattern of 24.
dsx1SendOtherTestPattern
8
Sending a test pattern other than those described by this object.
Note:
The SNMP agent returns
dsx1SendNoCode
- normal data. Natural MicroSystems does not support loopback.
Configuration
Not applicable.
(Page 10 of 39 in this chapter)
Version
Want to send us feedback on our documentation? Email:
Tech_Pubs@nmss.com
Copyright © 2000, Natural MicroSystems, Inc. All rights reserved.
(Page 10 of 39 in this chapter) Version (Page 10 of 39 in this chapter) Version