- To run snmpTrunkLog:
- From the command line, navigate to the nms\CTAccess\demos\snmp\snmptruklog directory (or the opt/nms/CTAccess/demos/snmp/snmptruklog directory under Unix).
- Enter the following:
snmpTrunkLog 10.1.20.45
- The following example shows snmpTrunkLog being run:
> snmpTrunkLog
SNMP Demonstration and Test Program V.3.0 Nov 15 1999
Natural MicroSystems Corporation.
Usage:
snmpChassScan [Address | DNSName] [options]
Address: default is 127.0.0.1
options: -cCommunity_name, specify community default is 'public'
-rN , retries default is N = 1 retry
-tN , timeout in hundredths-seconds default is N = 100 = 1 second
h Help S Sys info L Trunk list Q Quit
SEND A REQUEST FOR SYSTEM INFO TO: 10.1.20.45
System information:
System: Hardware: x86 Family 6 Model 3 Stepping 4 AT/AT COMPATIBLE - Software: Windows NT Version 4.0 (Build Number: 1381 Uniprocessor Free )
SysUpTime: 1:59:37.45
SysContact: Ilya Lugin
Computer name: ILUGIN
Location: NMS
SEND A REQUEST FOR TRUNKS TO: 10.1.20.45
Interface:1 Board:0 (AgE1) Trunk:0 Status: Loss of frame, NoSgnl
Interface:2 Board:1 (Ag-Quad-E1) Trunk:0 Status: Loss of frame, NoSgnl
Interface:3 Board:1 (Ag-Quad-E1) Trunk:1 Status: Loss of frame, NoSgnl
Interface:4 Board:1 (Ag-Quad-E1) Trunk:2 Status: Loss of frame, NoSgnl
Interface:5 Board:1 (Ag-Quad-E1) Trunk:3 Status: Loss of frame, NoSgnl
Interface:6 Board:2 (Ag-Quad-T1) Trunk:0 Status: In service
Interface:7 Board:2 (Ag-Quad-T1) Trunk:1 Status: Loss of frame, NoSgnl
Interface:8 Board:2 (Ag-Quad-T1) Trunk:2 Status: In service
Interface:9 Board:2 (Ag-Quad-T1) Trunk:3 Status: Loss of frame, NoSgnl
Interface:10 Board:3 (AgT1) Trunk:0 Status: Loss of frame, NoSgnl
(Page 7 of 7 in this chapter) Version