NMS SNMP Reference Manual
P/N 6744-13
Version
Version
Table of Contents
1 Introduction
- 1.1 Introduction
- 1.2 Network Management
- 1.2.1 Managed Nodes
- 1.2.2 Management Information Bases
- 1.2.3 Management Stations
- 1.2.4 Management Protocol
- 1.2.5 Object Identifier
- 1.2.6 Accessing MIB Objects
- 1.2.7 Using Get-Next
- 1.3 Supported MIBs
2 Installing and Activating SNMP
- 2.1 Introduction
- 2.1.1 Native Operating System Support
- 2.2 Windows NT 4.0 Systems
- 2.2.1 Installing SNMP on a Windows NT 4.0 System
- 2.2.2 Configuring SNMP on a Windows NT 4.0 System
- 2.2.3 Running SNMP on a Windows NT 4.0 System
- 2.2.4 OAM Package Uninstallation
- 2.3 Solaris Systems
- 2.3.1 Installing SNMP on a Solaris System
- 2.3.2 Configuring SNMP on a Solaris System
- 2.3.3 Modifying NmsChassis.acl
- 2.3.4 Registration Files
- 2.3.5 Modifying snmpdx.acl
- 2.3.6 Modifying enterprises.oid File
- 2.3.7 Modifying rc3
- 2.3.8 Running SNMP on a Solaris System
- 2.3.9 Stopping SNMP Subagents on a Solaris System
- 2.4 Unixware Systems
- 2.4.1 Installing SNMP on a Unixware System
- 2.4.2 Configuring SNMP on a Unixware System
- 2.4.3 Modifying snmpd.peers
- 2.4.4 Modifying the snmpd.trap File
- 2.4.5 Modifying the snmpd.comm File
- 2.4.6 Running SNMP on a Unixware System
- 2.4.7 Stopping SNMP on a Unixware System
- 2.5 Sample snmp.cfg File
3 Chassis MIB
- 3.1 Introduction
- 3.2 Chassis Representation
- 3.3 MIB Structure
- 3.3.1 Introduction
- 3.3.2 Chassis Configuration Table
- 3.3.3 Bus Segment Table
- 3.3.4 Board Access Table
- 3.3.5 Board Table
- 3.3.6 Traps Group
- 3.4 Using the Chassis MIB
- 3.4.1 Traps
- 3.4.2 Hot Swap
- 3.4.3 Board Status
- 3.4.4 Linking to the Trunk MIB
- 3.5 Node Tables
- chassMIBRevision
- chassConfig
- chassType
- chassDescr
- chassSegmentBusCount
- busSegmentTable
- busSegmentEntry
- busSegmentIndex
- busSegmentType
- busSegmentDescr
- busSegmentSlotsOccupied
- chassBoardAccess
- slotTable
- slotEntry
- slotBusSegmentIndex
- slotIndex
- slotBoardIndex
- slotStatus
- chassBoard
- chassBoardCount
- chassBoardTrapEnable
- boardTable
- boardEntry
- boardIndex
- boardBusSegmentType
- boardBusSegmentNumber
- boardSlotNumber
- boardModel
- boardModelText
- boardFamilyId
- boardFamilyNumber
- boardDescr
- boardStatus
- boardCommand
- boardTrunkCount
- boardRevision
- boardSerialNumber
- boardManufDate
- boardStatusLastChange
- boardStatusChangeTrapEnable
4 Trunk MIB
- 4.1 Introduction
- 4.2 MIB Structure
- 4.2.1 Known Limitations
- 4.3 Node Tables
- 4.3.1 Configuration Table
- dsx1ConfigTable
- dsx1ConfigEntry
- dsx1LineIndex
- dsx1IfIndex
- dsx1TimeElapsed
- dsx1ValidIntervals
- dsx1LineType
- dsx1LineCoding
- dsx1SendCode
- dsx1CircuitIdentifier
- dsx1LoopbackConfig
- dsx1LineStatus
- dsx1SignalMode
- dsx1TransmitClockSource
- dsx1Fdl
- dsx1InvalidIntervals
- dsx1LineLength
- dsx1StatusLastChange
- dsx1LineStatusChangeTrapEnable
- dsx1LoopbackStatus
- dsx1Ds1ChannelNumber
- dsx1Channelization
- 4.3.2 Current Table
- dsx1CurrentTable
- dsx1CurrentEntry
- dsx1CurrentIndex
- dsx1CurrentESs
- dsx1CurrentSESs
- dsx1CurrentSEFSs
- dsx1CurrentUASs
- dsx1CurrentCSSs
- dsx1CurrentPCVs
- dsx1CurrentLESs
- dsx1CurrentBESs
- dsx1CurrentDMs
- dsx1CurrentLCVs
- 4.3.3 Interval Table
- dsx1IntervalNumber
- dsx1IntervalValidData
- 4.3.4 Total Table
- 4.4 Trap Group
- dsx1LineStatusChange
5 Demonstration Programs
- 5.1 SNMP Demonstration Programs
- 5.2 Using the SNMP Demonstration Programs
- snmpget
- snmpnext
- snmpset
- snmpChassScan
- snmpHsMon
- snmpTrunkLog
Version
Want to send us feedback on our documentation? Email: Tech_Pubs@nmss.com
Copyright © 2000, Natural MicroSystems, Inc. All rights
reserved.