(Page 3 of 100 in this chapter) Version
AutoStop
Syntax
- AutoStop = stop
Access
- Read/Write
Type
- String
Default
- NO
Allowed Values
- YES | NO
Example
- AutoStop = YES
Description
- Specifies whether the board automatically stops when ctdaemon is stopped.
- The Supervisor-level keyword AutoStopEnabled enables or disables the autostop feature. If AutoStopEnabled is set to YES when ctdaemon is stopped, the Supervisor stops each board whose AutoStop keyword is set to YES. If AutoStopEnabled is set to NO, no boards are stopped automatically, regardless of the setting of the AutoStop keyword in the board keyword files.
- For more information, refer to the OAM System User's Manual.
See Also
- AutoStart
(Page 3 of 100 in this chapter) Version
Want to send us feedback on our documentation? Email: Tech_Pubs@nmss.com
Copyright © 2000, Natural MicroSystems, Inc. All rights
reserved.