(Page 80 of 100 in this chapter) Version
NetworkInterface.T1E1[x].ISDN.NFAS_Member[y].NAI
Syntax
- NetworkInterface.T1E1[x].ISDN.NFAS_Member[y].NAI = nai
- x = 0..3 (0-based trunk number or range of trunk numbers)
- y = index of the NFAS group member
Access
- Read/Write
Type
- Integer
Default
- For every member of an NFAS group, this field must be set in the configuration file of the board where the D channel resides.
Allowed Values
- 0 - 127
Example
- NetworkInterface.T1E1[0].ISDN.NFAS_Member[1].NAI = 4
Description
- Identifies the Network Access Identifier (NAI) for this NFAS member. ISDN applications use this number to refer to the trunk within an NFAS group. The NAI of each trunk in an NFAS group must be unique.
- If an NFAS group is not defined, there will only be one trunk controlled by every D Channel (the trunk where the D channel resides). In that case, the ISDN stack will set the NAI to be equal to the trunk number. If you want the NAI for an interface to be different from the trunk number, define an NFAS group consisting of one member and explicitly set the NAI trunk and board numbers for this member.
- When using this keyword, NetworkInterface.T1E1[x].D_Channel must be set to ISDN for the trunk (x) bearing the backup D channel.
- For more information about NFAS groups, refer to the AG ISDN Installation Manual.
See Also
- NetworkInterface.T1E1[x].ISDN.D_Channel_Backup_Trunk
, NetworkInterface.T1E1[x].ISDN.NFAS_Member.Count, NetworkInterface.T1E1[x].ISDN.NFAS_Member[y].Board, NetworkInterface.T1E1[x].ISDN.NFAS_Member[y].Trunk, NetworkInterface.T1E1[x].ISDN.NFASGroup
(Page 80 of 100 in this chapter) Version
Want to send us feedback on our documentation? Email: Tech_Pubs@nmss.com
Copyright © 2000, Natural MicroSystems, Inc. All rights
reserved.