(Page 20 of 111 in this chapter) Version
Clocking.HBus.SClockSpeed
Syntax
- Clocking.HBus.SClockSpeed = speed
Access
- Read/Write
Type
- String
Default
- 8M
Allowed Values
- 8M
Example
- Clocking.HBus.SclockSpeed = 8M
Description
- Specifies the speed (in MHz) of the driven Sclock when the board acts as primary master.
See Also
- Clocking.HBus.Segment
(Page 20 of 111 in this chapter) Version
Want to send us feedback on our documentation? Email: Tech_Pubs@nmss.com
Copyright © 2001, Natural MicroSystems, Inc. All rights
reserved.