(Page 5 of 111 in this chapter) Version
BootDiagnosticLevel
Syntax
- BootDiagnosticLevel = level
Access
- Read/Write (CG plug-in level)
Type
- Integer
Default
- 1
Allowed Values
- 0 | 1
Example
- BootDiagnosticLevel = 1
Description
- Specifies the level of diagnostics during initialization of the board. When disabled (set to 0) the board ignores any diagnostic errors returned while it is being initialized.
- The valid values for level are 0, and 1. Zero (0) indicates that no diagnostics are performed, and 1 is the maximum level.
- If a test fails, the test number is reported back as the error code.
Note: Some tests can pass back more than one error code, depending on the options selected and the mode of failure.
See Also
- BootDiagnosticMask
(Page 5 of 111 in this chapter) Version
Want to send us feedback on our documentation? Email: Tech_Pubs@nmss.com
Copyright © 2001, Natural MicroSystems, Inc. All rights
reserved.