(Page 80 of 111 in this chapter) Version
NetworkInterface.T1E1[x].ISDN.NFAS_Member[y].Board
Syntax
- NetworkInterface.T1E1[x].ISDN.NFAS_Member[y].Board = setting
- x = 0..3 (0-based trunk number or range of trunk numbers)
- y = index of the NFAS group member
Access
- Read/Write
Type
- Integer
Default
- For every member of an NFAS group, this field must be set in the board keyword file of the board where the D channel resides.
Allowed Values
- Any board number, as set in the NMS OAM system configuration file (oamsys.cfg).
Example
- NetworkInterface.T1E1[0].ISDN.NFAS_Member[1].Board = 0
Description
- Specifies the board number (as defined in oamsys.cfg) on which this NFAS member resides. This board number must match the board number specified in the NMS OAM system configuration file.
- When using this keyword, NetworkInterface.T1E1[x].D_Channel must be set to ISDN for the trunk (x) bearing the backup channel.
- For more information about oamsys.cfg, refer to the NMS OAM System User's Manual. For more information about configuring NMS ISDN, refer to the NMS ISDN Installation Manual.
See Also
- NetworkInterface.T1E1[x].ISDN.D_Channel_Backup_Trunk
, NetworkInterface.T1E1[x].ISDN.NFAS_Member.Count, NetworkInterface.T1E1[x].ISDN.NFAS_Member[y].NAI, NetworkInterface.T1E1[x].ISDN.NFAS_Member[y].Trunk, NetworkInterface.T1E1[x].ISDN.NFASGroup
(Page 80 of 111 in this chapter) Version
Want to send us feedback on our documentation? Email: Tech_Pubs@nmss.com
Copyright © 2001, Natural MicroSystems, Inc. All rights
reserved.