Table of Contents Index NMS Glossary Previous Page Next Page (Page 84 of 111 in this chapter) Version

NetworkInterface.T1E1[x].ISDN.NFASGroup

Syntax

NetworkIInterface.T1E1[x].ISDN.NFASGroup = groupnum

x = 0..3 (0-based trunk number or range of trunk numbers)

Access

Read/Write

Type

Integer

Default

For every NFAS group, this field must be set in the board keyword file of the board where the D channel resides.

Allowed Values

0 - 255

Example

NetworkInterface.T1E1[0..3].ISDN.NFASGroup = 0

Description

Specifies the NFAS group number. If NetworkInterface.T1E1[x].D_Channel is set to ISDN and NetworkInterface.T1E1[x].ISDN.NFASGroup is not specified, this trunk runs ISDN, but is not part of an NFAS group.

Note: This keyword is valid only on the trunk where NetworkInterface.T1E1[x].D_Channel = ISDN.

For more information about NFAS groups, refer to the NMS ISDN Installation Manual.

See Also

NetworkInterface.T1E1[x].ISDN.D_Channel_Backup_Trunk, NetworkInterface.T1E1[x].ISDN.NFAS_Member.Count, NetworkInterface.T1E1[x].ISDN.NFAS_Member[y].Board, NetworkInterface.T1E1[x].ISDN.NFAS_Member[y].NAI, NetworkInterface.T1E1[x].ISDN.NFAS_Member[y].Trunk


Table of Contents Index NMS Glossary Previous Page Next Page (Page 84 of 111 in this chapter) Version

Want to send us feedback on our documentation? Email: Tech_Pubs@nmss.com
Copyright © 2001, Natural MicroSystems, Inc. All rights reserved.