(Page 85 of 111 in this chapter) Version
NetworkInterface.T1E1[x].Length
Syntax
- NetworkInterface.T1E1[x].Length = length
- x = 0..3 (0-based trunk number or range of trunk numbers)
Access
- Read/Write
Type
- Integer
Default
- 0
Allowed Values
- Any integer.
Example
- NetworkInterface.T1E1[0..3].Length = 0
Description
- Specifies the length in feet of the cable connecting the board to the telephone network, so that the T1 framer can adjust the pulse shape accordingly.
See Also
- NetworkInterface.T1E1[x].ConfigFile
, NetworkInterface.T1E1[x].CRCMFMode, NetworkInterface.T1E1[x].D_Channel, NetworkInterface.T1E1[x].FrameType, NetworkInterface.T1E1[x].Impedance, NetworkInterface.T1E1[x].Length, NetworkInterface.T1E1[x].LineCode, NetworkInterface.T1E1[x].SignalingType, NetworkInterface.T1E1[x].Type
(Page 85 of 111 in this chapter) Version
Want to send us feedback on our documentation? Email: Tech_Pubs@nmss.com
Copyright © 2001, Natural MicroSystems, Inc. All rights
reserved.