(Page 88 of 111 in this chapter) Version
NetworkInterface.T1E1[x].Type
Syntax
- NetworkInterface.T1E1[x].Type = trunk_type
- x = 0..3 (0-based trunk number or range of trunk numbers)
Access
- Read/Write
Type
- String
Default
- E1
Allowed Values
- T1 | E1 | NONE
Example
- NetworkInterface.T1E1[0..3].Type = E1
Description
- Specifies the trunk type for each trunk on the board. The default is E1 for CG 6000C boards.
Note: This setting must be the same for all active trunks. Unused trunks must be configured as NONE.
See Also
- NetworkInterface.T1E1[x].ConfigFile
, NetworkInterface.T1E1[x].CRCMFMode, NetworkInterface.T1E1[x].D_Channel, NetworkInterface.T1E1[x].FrameType, NetworkInterface.T1E1[x].Impedance, NetworkInterface.T1E1[x].Length, NetworkInterface.T1E1[x].LineCode, NetworkInterface.T1E1[x].SignalingType
(Page 88 of 111 in this chapter) Version
Want to send us feedback on our documentation? Email: Tech_Pubs@nmss.com
Copyright © 2001, Natural MicroSystems, Inc. All rights
reserved.