- If a board is not running in enhanced mode, use this function to stop ringing at a station (started using cdiStartRing
).
- If the board is running in enhanced mode, the DSP automatically stops ringing at a station when the station is taken off-hook (CDIEVN_OFF_HOOK is returned). In this case, cdiStopRing
returns CTAERR_FUNCTION_NOT_ACTIVE.
- Refer to Section 3.2 for more information about enhanced mode.
- For more information about ringing, refer to Section 3.5.
(Page 15 of 20 in this chapter) Version