ActiveAG Status codes
Almost all methods in ActiveAG return a status value that indicates whether
they were successful or, if not, what error occurred. In addition, these same
status codes will appear in the
The ActiveAG status codes are listed here for reference. The constant AagErrStart is defined to be 14000.
Symbolic name Value Meaning
AagSuccess 0
AagErrNoBoards AagErrStart No AG boards found
AagErrBadLine AagErrStart + 1 Invalid line number
AagErrCallDiscon AagErrStart + 2 Call was disconnected during function
AagErrGlare AagErrStart + 3 Incoming while placing call
AagErrInService AagErrStart + 4 Back after OOS
AagErrLineNotOpen AagErrStart + 5 What it says...
AagErrNoFile AagErrStart + 6 File not found
AagErrNoMem AagErrStart + 7 Error allocating dynamic mem
AagErrNoRegPath AagErrStart + 8 No path in registry
AagErrNoThread AagErrStart + 9 Can't create worker thread
AagErrNoTone AagErrStart + 10 For 'Get...' & 'Peek...'
AagErrNoTones AagErrStart + 11 No touch tones collected
AagErrNotConnected AagErrStart + 12 No connection when DIALing
AagErrAdiError AagErrStart + 13 Some failure code from AG
AagErrAdiFormat AagErrStart + 14 Unrecognized data type from Get/Set
AagErrCtaError AagErrStart + 15 Some failure code from CTA
AagErrNfxError AagErrStart + 16 Some failure code from NFX
AagErrParmMisMatch AagErrStart + 17 Used in safe array validation
AagErrSafeLBound AagErrStart + 18 "
AagErrSafeUBound AagErrStart + 19 "
AagErrSafeGet AagErrStart + 20 "
AagErrLineOpen AagErrStart + 21 Line is already open
AagErrCtaNotInit AagErrStart + 22 CTA did not initialize
AagErrConnected AagErrStart + 23 Call already connected (AnswerCall)
AagErrVceError AagErrStart + 24 Some failure code from VCE
AagErrNoPromptFile AagErrStart + 25 Prompt file not found
AagErrFunctionActive AagErrStart + 26 another method is currently active
AagErrMethodNotAvail AagErrStart + 27 method is not available in this version
AagErrFileOpen AagErrStart + 28 Error opening file
AagErrEnd AagErrFileOpen